The Nighthawk M1 mobile router is the first 1Gbps mobile hotspot from Netgear. It uses Qualcomm's Snapdragon X16 LTE chipset that could achieve download speeds of up to 1000Mbps through 4-band carrier aggregation. It has d 4 × 4 MIMO built-in antennas which 4 × 4 MIMO can provide + 100% speeds compared to current mainstream 2 × 2 MIMO. Beside, M1 also has two TS-9 antenna slots for inserting external antenna.
When do I use an external antenna?
All of us want to surf online with fast and uninterrupted internet. However, If you're in a rural, low, low-signal area, or you can not get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way. Then an external antenna is required. Here are some 4G LTE external antennas for you.
Recommended external antenna for M1
The Nighthawk M1 Mobile Hotspot has two antenna ports as pictured. You can connect an antenna to one or both slots. Connecting 2 Antennas (1 to each port) may help to give a more consistent signal. It only accepts TS9 antenna connector. There are many choices for M1, look at the following recommendation.
Outdoor external antenna - dual TS9 connector
24dbi Dual TS9 connector external antenna Specifications:
* Frequency Range: 698-806MHZ / 824-894mhz / 925-960mhz / 1710-1885MHZ / 1920-1980MHZ / 2110-2170MHZ / 2500-2690MHZ
* Gain: 24dbi
* Polarization Type: Vertical
* Radiation: Omni
* VSWR: ≤1.5
* Impedance: 50Ω
* Max Power: 50w
* Cable Type: RG58 (Best) 100%
* Cable Length: for customization
* Dimensions: 9.85x 18.5x 1.2inches
* Weight: 2.58 Pound
View more please go to https://www.store4g.com/24dbi-4g-outdoor-panel-antenna/
Outdoor external antenna - single TS9 connector
11dbi TS9 connector external antenna Specifications:
Frequency Range (MHz): 698-960 / 1710-2700 mHz
Width: 262 / 990MHz
Half-powerbeam width (°): H: 65/50 V: 55/40
Gain: 11 dBi
VSWR: ≤1.5
Intermodulation IM3 (dBm): ≤ -97
Input Impedance (Ω): 50
Polarization: Vertical or Horizontal
Maximum input power (W): 50
Horizontal Beamwidth (half): 60/55
Lightning protection: DC Ground
Connector type: SMA / TS9 / CRC9
Dimensions (mm): 445 * 210 * 65
Antenna weight (kg): 0.91
Operating temperature (° c): -40 ~ 60
Rated Wind Velocity (m / s): 60
Radome material: ABS
View more please go to https: /www.store4g.com/outdoor-4g-antenna-700-2700mhz/
Indoor external antenna - dual TS9 connector
35db dual TS9 antenna specifications:
4G Frequency Range: 791-821MHz / 832-862MHz / 1710-1785MHz / 1805-1880MHz / 2500-2570MHz / 2620-2690MHz
* Connector Type: SMA Connector (two)
* VSWR: <= 2.5
* Gain: 35dBi
* Polarization type: Vertical
* Radiation: Omni
* Maximum input power: 10W
* Input impedance: 50 ohms
* 5cm (Diameter)
* Cable type: RG174 (best) 100% coax
* Cable length: 2m
* Size: 22cm x 19cm x 2.1cm
* Weight: 136g
View more please go to https://www.store4g.com/dual-connector-4g- Antenna /
Antenna Using Tips
About Mounting: To be most effective, the external antenna (s) should be mounted where the cellular signal is best. This is usually near a window or outside wall - outdoors, away from under construction is almost always better.
About cable length: It is recommended that you do not choose cable length longer than 10meters, as the longer the cable, the weaker the signal would increase.
No comments:
Post a Comment